58
7 SHARING CONTE
NT ON YOUR TECHNICOLOR GA
TEWAY
DMS-CTC-20101206-0017 v1.0
7.3 The FTP Server
Introduction
The Technicolor Gateway allows you to access your shared content by FTP. This can be useful if you want to be able to
access your shared content from the Internet.
Via FTP you can download and upload all types of files both from your local network and the Internet.
Setting up the FTP server
Proceed as follows:
1 Protect your account with a password.
2 Enable the FTP Server and select the managed partition.
Protect your account with a password
If you did not yet configure your login to the Technicolor Gateway GUI with a password:
1 Browse to the Technicolor Gateway GUI.
For more information, see “Accessing the Technicolor Gateway GUI” on page 33.
2 On the Toolbox menu, click User Management.
3 In the Pick a task list, click Change my password.
4 Leave the Old Password box empty.
5 Type your new password both in the New Password box and Confirm New Password box.
Enable the FTP Server and select the managed partition
Proceed as follows:
1 Browse to the Technicolor Gateway GUI.
For more information, see “Accessing the Technicolor Gateway GUI” on page 33.
2 On the Tools menu, click Content Sharing.
3 In the Navigation bar, click Configure.
4 Under FTP Server, click Server Enabled.
5 Under List of connected disks, click the radio button next to the partition to make it managed.
6 The Technicolor Gateway now creates a Media and Shared folder on the selected partition. The Shared folder will be
used as root location for FTP sessions.
7 Click Apply.
To Next Page
Loading...
Need help?
General
