Technics EAH-AZ70W User Manual

A. Part names
Main unit (earphones)
(Earphones hereafter in the instructions)
B. Charging
The chargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit.
1. Use the USB charging cord (supplied) ( b) to connect the charging cradle to a computer (a).
• Charging of the charging cradle starts. The charging cradle LEDs light or blink (white)
while the charging cradle is charging. Charging is complete when they turn off.
2. Put the earphones into the charging cradle.
• Confirm the L side and R side of the earphones, and match the positions of the charging terminals on the
earphones with the terminal sections in the charging cradle. (Charging of the earphones will not start if the
positions do not match.)
• The way the earphone LEDs light when you put the earphones into the charging cradle depends on the usage
status.

Technics EAH-AZ70W Specifications

General

Cable length	0.5 m
Control type	Touch
Headset type	Binaural
Product type	Headset
Product color	Silver
Wearing style	In-ear
Recommended usage	Calls/Music
Works with the Google Assistant	Yes
International Protection (IP) code	IPX4
Battery type	Built-in battery
Battery recharge time	2 h
Continuous audio playback time	6.5, 7.5 h
Battery recharge time (charging case)	2.5 h
Continuous audio playback time (with charging case)	19.5 h
Wireless range	10 m
3.5 mm connector	No
USB connectivity	-
Bluetooth version	5.0
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
Connectivity technology	Wireless
Impedance	- Ω
Driver unit	10 mm
Magnet type	Neodymium
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Cables included	USB
Charging case type	Wired
Charging case connector type	USB Type-C
Microphone type	Built-in

Weight and Dimensions

Charging case weight	65 g
Left earpiece weight	7 g