Technics SA-AX540 User Manual

Basic operations
12 3 4
Before operation, set [VOLUME] to the “MIN” position.
1 Press [POWER, (I) /I],
2 Press [A] and/or [B] to select the
speaker system(s) to be used.
A and B refer to the speaker terminals at the rear of the unit.
If the button is pressed once more, the indicator will switch
off and no sound will be heard from the speakers.
3 Turn [INPUT SELECTOR] to select and
start the desired source.
(Refer to the appropriate operating instructions for details.)
The indicator corresponding to the selected source lights
and the source is shown on the display.
TAPE: To listen to cassette tapes
VCR: To watch video tapes
TV: To watch TV
DVD: To enjoy DVD
CD: To listen to compact discs
TUNER: To listen to radio broadcasts
PHONO: To listen to phono discs
iygn?i
To watch a video (or DVD) or the TV, set the TV to either
the TV mode or VIDEO mode.
4 A djust the volume.
For your reference
• If the Dolby Pro Logic or SFC mode has been selected
After displaying the selected source, the display will then
change to show the Dolby Pro Logic or SFC mode.
(* page 20)
If the source chosen was TUNER then the display will change
again to show the frequency.
• If you are using VCR and you select TAPE, CD, TUNER, or
PHONO
The picture will remain on the screen.
< When you finish listening
j Be sure to reduce the volume, and switch the power to the
standby condition by pressing [POWER, (j)/l].
14
RQT5212

Technics SA-AX540 Specifications

General

Brand	Technics
Model	SA-AX540
Category	Stereo Receiver
Language	English