Technics SA-AX540 User Manual

DVD 6CH INPUT mode
2 1
! 1
INPUT SELECTOR_
(O)_
//// II
±11/ II
Use this mode when playing back 6 channel discrete sources such
as Dolby Digital and DTS. To use this mode connect a DVD
player, digital surround processor or any other component that has
6 channel discrete output capabilities page 9).
Dolby Digital, DTS and other 6 channel discrete sources are
recorded with each speaker channel discrete from the other.
Depth, movement, position and other characteristics are
maintained, so using this mode will make you feel as if you were
at a movie theater.
Ensure you have your speakers set up in the following way.
© The front speakers are connected to the A terminals (^ page
12) and “SPEAKERS A” is selected.
1 Turn [INPUT SELECTOR] to select
“DVD.”
2 Press [DVD 6CH INPUT] to select
“DVD 6CH.”
Changes as follows, each time the button is pressed.
DVD 6CH ~ DVD (2CH)
DVD 6CH INPUT __ _ _
\|/ r\ III/ U /_//_/
O \Vx\ ±1 1/ ±1 l_l l_ I l
/|X *sj -
© If you press this button while another source (CD,
PHONO, etc.) is selected, the receiver switches the
source to DVD and engages the DVD 6CH INPUT mode.
© All sound mode indicators are turned off when DVD 6CH
INPUT is turned on. The STEREO mode and indicator
comes on when DVD 6CH INPUT is turned off.
3 S tart the desired source.
Follow your equipment's operating instructions.
© This mode cannot be turned on while SPEAKERS B is on. If
SPEAKERS B is selected or both speakers are turned off when
this mode is selected, this mode is automatically cancelled.
When SPEAKERS B is turned off again or SPEAKERS A is
selected, the mode is automatically turned on.
© You cannot select Dolby Pro Logic or any of the SFC modes
while in the DVD 6CH INPUT mode.
i
t
24
RQT5212

Technics SA-AX540 Specifications

General

Brand	Technics
Model	SA-AX540
Category	Stereo Receiver
Language	English