Technics SA-AX540 User Manual

Making a recording
i n
ll
0
c
D
csa
When you select DVD 6CH INPUT mode, only sound from the
front left and right channels is recorded.
To record all 6 channels
Set the playback mode on your DVD player or decoder to two
channel (stereo) mode. For details, see the equipment’s operating
instructions.
Before recording, prepare the tape deck.
See the tape deck’s operating instructions for details.
1 Turn [INPUT SELECTOR] to select the
source to be recorded.
Any source can be selected except TAPE.
2 Begin recording on the tape deck.
Follow your tape deck's operating instructions.
3 Begin the source to be recorded.
Follow your equipment’s operating instructions.
To monitor the recorded sound
It is possible to check the sound being recorded if your tape deck
is a 3 head system.
Press [TAPE MONITOR] on this unit and
set the monitor button on the tape deck to
“TAPE”.
Press [TAPE MONITOR] once again to turn it off.
Before recording, prepare the VCR.
See the VCR’s operating instructions for details.
D Turn [INPUT SELECTOR] to select the
source to be recorded.
Any source can be selected except VCR and TAPE.
CSS
Recording from the tape deck is not possible.
Begin recording on the VCR.
Follow your VCR’S operating instructions.
Begin the source to be recorded.
Follow your equipment's operating instructions.
32
RQT5212

Technics SA-AX540 Specifications

General

Brand	Technics
Model	SA-AX540
Category	Stereo Receiver
Language	English