Technics SA-AX540 User Manual

Specifications (JHF’78)
■ AMPLIFIER SECTION
Rated minimum sine wave RMS power output
40 Hz-20 kHz both channels driven
0.8 % total harmonic distortion
100 W per channel (8 Cl)
1 kHz continuous power output both channels driven
0.05 % total harmonic distortion
105 W per channel (8 ft)
Total harmonic distortion
rated power at 40 Hz-20 kHz
0.8 % (8 ft)
half power at 1 kHz
0.07 % (8 ft)
Power output at the Dolby Pro Logic operation
0.9 % at 1 kHz,
Front 2 x 100 W (8 ft)
Center 100 W (8 ft)
Surround
2x 100 W(8 ft)
Low frequency damping factor
30 (8 ft)
Load impedance
Front
A or B
4-8 ft
A and B
8ft
Center 8ft
Surround
8ft
Frequency response
PHONO RIAA standard curve
(30 Hz-15 kHz) ±0.8 dB
CD, TAPE, DVD, VCR, TV
10 Hz-70 kHz, ±3 dB
Input sensitivity
PHONO
0.4 mV (3 mV, IHF '66)
CD, TAPE, DVD, VCR, TV
27 mV (200 mV, IHF '66)
S/N (IHF A)
PHONO
70 dB (80 dB, IHF '66)
CD, TAPE, DVD, VCR, TV
75 dB (85 dB, IHF '66)
Input impedance
PHONO
47 kft
CD, TAPE, DVD, VCR, TV
22 kft
Tone controls
BASS
50 Hz, +10 to -10 dB
TREBLE
20 kHz,+10 to-10 dB
Subwoofer frequency response 7-100 Hz, ±3dB
SI FM TUNER SECTION
Frequency range
Sensitivity
50 dB quieting sensitivity
MONO
STEREO
Total harmonic distortion
87.9-107.9 MHz
11.2 dBf (2 mV, IHF'58)
18.3 dBf (4.5 nV, IHF’58)
38.3 dBf (45 mV. IHF ’58)
MONO 0.2 %
STEREO 0.3 %
S/N
MONO 73 dB
STEREO 67 dB
Frequency response 20 Hz-15 kHz,+1 dB,-2 dB
Alternate channel selectivity 65 dB
Capture ratio 1.5 dB
image rejection at 98 MHz 40 dB
Spurious response rejection at 98 MHz 75 dB
AM suppression 50 dB
Stereo separation
1 kHz 40 dB
10 kHz 30 dB
Antenna terminal
75 ft (unbalanced)
■ AM TUNER SECTION
Frequency range
Sensitivity
Selectivity
IF rejection (at 1000 kHz)
530-1710 kHz
20 mV, 330 MV/m
55 dB
50 dB
■ VIDEO SECTION
Output voltage at 1 V input (unbalanced) 1±0.1 Vp-p
Maximum input voltage 1.5 Vp-p
Input/output impedance 75 ft (unbalanced)
■ GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 450 VA, 350 W
Dimensions (W x H x D) 430 x 136 x 320.6 mm
(16-15/16" x 5-11 /32" x 12-5/8'*)
Weight 8.8 kg (19.54 lb.)
Power consumption in standby mode:
1 W
Notes:
1. Specifications are subject to change without notice.
Weight and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a
soap-and-water solution or a weak detergent solution.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that
came with the cloth carefully.
Product Service
Do not attempt to remove the cover(s) or repair the unit yourself.
Refer servicing to qualified personnel only.
Product information
For product service, product information or assistance with
product operation, refer to the servicenter directory.
RQT5212
Reference

Technics SA-AX540 Specifications

General

Brand	Technics
Model	SA-AX540
Category	Stereo Receiver
Language	English