Technics SA-AX540 User Manual

The radio
3 2,4
§21 Manual memory presetting
The desired stations can be preset into the desired channels by
the user.
1 Set to the desired frequency.
( ■ > Page 16-17.)
If interference or static is keeping you from enjoying an FM
broadcast, press [FM MODE] and change to monaural.
You can preset the station in monaural just as in stereo.
2 Press [MEMORY].
To cancel the memory function, press [MEMORY] again.
3 Press [TUNING (v or a)] to select the
desired channel.
Holding the buttons down lets you scroll through channels
faster.
4 Press [MEMORY].
The channel will blink on the display.
To continue presetting
Repeat steps 1 through 4.
To listen to preset channels
H Press [PRESET],
Press [TUNING (v or A)].
Holding down the buttons lets you scroll through channels
faster.
The channel number flashes for approximately 5 seconds.
Select the desired channel number during that time.
After 5 seconds, the display will change from the channel
number to the frequency.
If you press [PRESET] while the channel number is displayed, the
display will change to the frequency.
To confirm the channel number of the station being
received
Press [PRESET],
(The channel number flashes for approximately 5 second.)
The channel number is not displayed if you change the frequency
or FM mode setting.
For your reference
Even if the power supply cord is disconnected from the household
AC outlet, the memory will retain its contents for approximately
one month.
If frequency presettings are accidentally erased
Program the presettings once again.
The power supply cord should remain connected for one hour or
more for the memory back-up to be effective.
19
RQT5212
Radio
functions

Technics SA-AX540 Specifications

General

Brand	Technics
Model	SA-AX540
Category	Stereo Receiver
Language	English