Technics SC-CH700 User Manual

Listening to Radio Broadcasts
2 3
FM
MODE
O
Memory tuner operation _
(to listen to broadcast stations preset into memory)
Have you performed the steps of “Automatic
memory presetting’’ on page 38 or “Manual mem¬
ory presetting’’ on page 39?
This function can also be performed from the remote control. Follow
the procedure described below.
1 Press the input select button marked
“TUNER” on the amplifier.
2 Press the band select button to select the
desired band (FM/MW/LW).
Each time you press the band-select button, the FM,MW and
LW indicator will be alternately displayed.
3 Press one of the preset tuning buttons to se¬
lect the desired preset channel.
The selected preset channel will illuminate.
T' 2
kJj l£j
lli lL
lIj
9 10
lIj
11
lIj
12
QUAffraocK
13 14
IS 16
17
« i l\ /
•'_ !
s s i
19 20 21 22 23 24 / • '
i is i •
’ MHz
25 26 27 20
29
30 S
9TIREO
■ To change the FM mode
Press the FM mode button to monaural position.
FM
MODE
O
The FM stereo indicator will change to “MONO”.
The sound will then be heard in monaural. If the broadcast signal is
weak, or if there is a large amount of interference, sounds can be
heard more clearly.
■ Most recent memory
The most recent memory system “remembers” the broadcast sta¬
tion last tuned to when the power is switched to standby mode or
other functions are selected. The last tuned station will be heard
when the unit is switched "ON" or the tuner source is selected.
Memory presetting is maintained for approximately 2 weeks even if
the unit is in the standby mode.
Note:
If the noise is picked up when a video disc player is connected
to this system, switch off a video disc player.

Technics SC-CH700 Specifications

General

Brand	Technics
Model	SC-CH700
Category	Stereo System
Language	English