Technics SC-CH700 User Manual

Concerning Cassette Tapes
Selection of cassette tapes |
Do not use the following types of tapes in this unit.
•120-minute (or longer) tapes
Because the tape is very thin, it might stretch during use causing
unstable tape movement which may result in the tape becoming
tangled in the rotating parts of this unit.
•Fe-Cr tapes (TYPE III)
The high frequency range will be emphasized and it will not be
possible to obtain a flat frequency response.
•Metal tape without detection holes in the cassette
Recordings will be very distorted. (There is no playback problem
however.)
Tape slack _
Tape slack may cause the tape to break.
To prevent erasure of recorded
sounds
Remove the erase-prevention tabs (thus preventing recording).
■ To re-record on a protected cassette
Cover the slot with adhesive tape.
Avoid tape storage in the following
places
Tape can be damaged if it is stored in places such as described
below.
•Where the temperature is high (95T/35°C or higher) or where the
humidity is high (80% or higher).
•Where there is a strong magnetic field (near a speaker, on top of
a TV, etc.). Recording may become erased.
•In direct sunlight.

Technics SC-CH700 Specifications

General

Brand	Technics
Model	SC-CH700
Category	Stereo System
Language	English