Technics SC-EH500 User Manual

Concerning the display
The sound processor shows the level of each sound range with the
three types of display described belows, 0
Press D1SP MODE/-DEMO momentarily.
The spectrum display will change as follows.
lE) Normal display
This display indicates the strength of the sound in each tonal
range.
GEJ Peak-hold display
The peak sound value of each sound range is held on the display
tor about one second after_occurs.
U] Aurora display
The peak sound value of each sound range is displayed in
inverted form.
For your reference:
The demonstration function starts when DISP MODE/-DEMO is
held down.
3 ]
3
3
mim
MUTING
ISC-EH500I
OQO
ooo
oao
Sm O
disc
liswa j
MUTING^.
bm liii
MUTING
'iTLUJJ
a m
u
DOH
r^Ti.
I VOLUME I 1
To mute the volume E
This feature is convenient when you have a telephone call, etc.
tsmmmmm
Press MUTING.
"MUTING" will light.
Sound remains muted when you put the stereo on standby.
To cancel, press MUTING once again. ("MUTING" goes out.)
To cancel from the tuner/amplifier, reduce the volume level to the
minimum position (— dB) and then reset to the desired volume.

Technics SC-EH500 Specifications

General

Brand	Technics
Model	SC-EH500
Category	Speaker System
Language	English