Technics SC-EH500 User Manual

Recording
operations
1st track
(Side B)
Track is cut in the middle.
irn
2
3 4
k
Remainder of track 5 —
1st track
(Side B)
im
m
3 4
i
5
!)
1st track
r
- 1st disc -
(Side A) ||
1
i 2 I
3
□
(Side B)
1 1 2
1
5
1 II II
3rd disc 2nd disc
Recording from compact discs
1 For SC-EH5WI
DECK 2 only
There are 2 ways to record from compact discs, normal recording and
one-touch editing.
Normal recording □
In normal recording, no blank space is left at the end of side A. But,
this means a track will be cut off in the middle when the end of the
side is readied. This method can also be used to record onto a tape
from a desired point halfway through one side, or to record from
programmed CDs.
One-touch editing [A1 EDIT] E
The tape deck automatically reads the length of the loaded tape, and
then calculates which tracks go on which side of the tape so that no
track is cut in the middle when the tape reaches either end.
One-touch editing operation:
1. The cassette deck will fast-forward and rewind to measure its
length.
2. The cassette deck will advance the tape beyond the leader tape,
and then stop.
3. The CD player assigns tracks to tape side A and B, and displays
the result. In addition to the above information, the remaining
time of tape side A and B will be displayed.
4. Actual recording starts.
| Notes
•Use a tape of under 99 minutes.
•You cannot edit-record tracks numbering higher than 24.
Recording onto left over space on tapes (LINK): E
After the edit-recording of loaded CD have finished, you can subse¬
quently edit-record other CD(s) on the remaining blank portion of the
tape.
This function is convenient when recording from 8 cm CDs succes¬
sively.
For your reference:
It is better to use a tape slightly longer than the CD playing time when
recording.

Technics SC-EH500 Specifications

General

Brand	Technics
Model	SC-EH500
Category	Speaker System
Language	English