Technics SC-HD81 User Manual

Playback
Type of tape which can be played correctly:
The unit automatically identifies the type of tape.
O
High position/TYPE 1
Metal position/TYPE IV
il Switch on the power.
fy] Press 4 OPEN/CLOSE on deck, and then insert
the tape.
Load a tape with the exposed side facing the cassette holder’s
insertion part.
Insert the cassette tape until it touches the back of the compart-
ment.
Press & OPEN/CLOSE once again to close the cassette holder.
pinched when it closes.
E} To listen to a tape recorded in Dolby B NR
Drace NAMI RV AID and ashael “FW "Ile Alan!
Lice) MW 1 IND GU GiGUR Lak FO Ul 1
When playing back a tape which was not recorded on Dolby NR
system, press DOLBY NR so that indications go off.
A Press REV MODE to select the reverse mode.
Each time you press REV MODE, one of the indicators will
appear.
=: The deck plays one side only, and then stops automa-
tically.
==>: The deck plays both sides, and then stops automatically.
c—=>: The deck plays both sides 8 times, and then stops auto-
matically.
[ej Press <orP.
>: The forward side will play.
<4: The reverse side will play.
6] Adjust the volume level as you like.
To stop tape playback:
Press Mf.
;—— One-touch play
When the system is OFF, playing starfs automatically when
you press <4 or ® on the remote control.
The play will start with volume increasing gradually.
Cassette deck operations
a a Y-
{or

Technics SC-HD81 Specifications

General

Brand	Technics
Model	SC-HD81
Category	Speakers
Language	English