Technics SC-HDA710 User Manual

12
RQT5479
Before use
If the clock has not been set, a demonstration of the display is
shown when the unit is off.
This function is set to on at the time of purchase.
To get the most from ECO mode, turn this function off.
Press and hold [CLOCK/TIMER, –DEMO]
until “NO DEMO” is displayed.
Each time you press and hold the button:
DEMO MODE (on) NO DEMO (off)
The display demonstration
A
This is a 24-hour clock.
The example shows how to set the clock for Wednesday 16:25
(4:25 pm).
1 Press [ /I] to turn the unit on.
2
qq
Press [CLOCK/TIMER, –DEMO] to
display “ CLOCK.”
Each time you press the button:
CLOCK → PLAY → REC → Original display
↑
ww
Within 7 seconds
Press [SET].
3
qq
Press [TUNE/TIME ADJUST
( or )] to set the day.
ww
Press [SET].
4
qq
Press [TUNE/TIME ADJUST
( or )] to set the time.
ww
Press [SET].
The time is set and the original display is restored.
Displaying the clock
Press [CLOCK/TIMER, –DEMO].
The clock is shown for about 5 seconds.
Saving power in standby mode
C
When this mode is turned on, the clock is not displayed when the
unit is in standby mode, thereby reducing standby mode power
consumption from 11 W to 0.9 W. The standby indicator still lights.
Turn DEMO off. ECO does not work when DEMO is on.
Turning ECO on and off:
qq
Press [ /I] to turn the unit on.
ww
Press [MODE].
The current mode is displayed. Press again to change the mode.
Each time you press the button:
NORMAL (off) ECO (on)
The mode can be switched to ECO when the unit is off but it can
not be switched back to NORMAL.
Note
Setting the time
B
1
23, 4
CLOCK/TIMER, –DEMO
1
/ I
2
SET
CLOCK/TIMER
– DEMO
1
2
CLOCK
3
SET
TUNE/TIME ADJUST
1
2
SUN MON TUE WED
THU FRI SAT
4
SET
TUNE/TIME ADJUST
1
2
WED 16:25
1
2
MODE
/I
C
A
B
The unit automatically shows a demonstration of the display when
you connect the unit to the household AC mains supply.
Turning the DEMO function off

Technics SC-HDA710 Specifications