Maintenance (See page 48 for details.)
Clean the cabinet, panel and controls with a soft cloth lightly moist-
ened with mild detergent solution.
Do not use any type o! abrasive pad, scouring powder or solvent
such as alcohol or benzine.
Service
1. Damage Requiring Service -- The unit should be serviced by
qualified service personnel when:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects have fallen or liquid has been spilled into the
unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not appear to operate normally or exhibits
a marked change in performance; or
(e) The unit has been dR)pped, or the enclosure damaged.
2. Servicing -- The user should not attempt to service the unit
beyond that described in the operating instructions. All other ser-
vicing should be referred to authorized service personnel.
(Only for U.S.A.)
Call 1-800-545-2672 for the address of an authorized factory
servicenter.
Cautions on moving the CD changer
Before moving the changer to another location, be sure to
remove all discs from the slots and turn offthe changer.
Failure to do so will expose the compact discs and the changer
to the risk ol severe damage.
CAUTION
The changer mechanism automatically locks when power is
turned off, to protect it against damage in transport.
Therefore, always press POWER and make sure "OFF" appears
on the display before you unplug the changer.
Listening caution
@
L_S_NING
Selecting fine audio equipment such as the unit you've just pur-
chased is only the start of your musleat enjoyment. Now it's time to
consider bow you can maximize the fun and excitement your equip-
ment offers. This manufacturer and the Electronic Industries
Association's Consumer Electronics Group want you to get the
most out of your equipment by playing it at a safe level. One that
lets the sound come through loud and clear without annoying blar-
ing or distortion--and, most importantly, without affecting your sen-
sitive hearing.
We recommend you to avoid prolonged exposure to excessive
noise.
Sound can be deceiving. Over time your hearing "comfort level"
adapts to higher volumes of sound. So what sounds =normal" can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
Other cautions
Outside light or noise may sometimes cause the changer to
detect a disc when there isn't one. However, the changer always
correctly detects the disc when in the play mode no matter what.
Do not leave the front panel open. Infiltrating dust or other mat-
ter may tead to damage or malfunctions.
e.J
To Next Page
Loading...
Need help?
General
