Use Deck 2 to record the sound being played back on Deck 1.
320EC't"l
/
©
L_J
SYNCHRO
START
5!-I:1.
:1-t5
I()
• RECPAUSE
©
()1
L_J
[_
Load tapes which have been advanced to the end of the leader
tape into both decks.
Deck 1: For playback Deck 2: For recording
[27i EVEi SE........... ;ress'R Vi=i S "MOOi;io...........
MODE select the desired reverse
[_ mode.
_J /,..m= nnn I
?' uuu- I
.ZO --I 5 .0 -6 .3 0 +2 *4
Each time the button is pressed, the indi-
cator will change in the order:
J
: Only one side of the tape will be
recorded, and then operation will
automatically stop.
C_ : Both sides of the tape (first the
forward side and then the reverse
side) will be recorded, and then
operation will automatically stop.
If the recording tape is longer than
the playback tape, the playback
tape will be played repeatedly as
many as eight times until the
recording tape is finished.
CO : Both sides of the tape (first the
forward side and then the reverse
side) will be recorded once, and
then operation will automatically
stop.
SPE'ED..............P_SS SPEEDto seiect the .....
NO_I recording speed.
= s #o00 o_
-_0 -15 -i 0 ,._ .3 ¢ _2 *4
b-
Each time the button is pressed, the indi-
cators will change in the order:
NQR--+ HI --_ off.
1"
I
NOR: normal speed
HI: approx, double speed
(Recording will begin.)
To stop recording
1, PressDECK 1/2to selectthe Deck 2.
2, PressII,
m
To record on only one side of the tape, set the tape side indicators
(<_ or _>) on Deck 1 and Deck 2 in accordance with the tape sides
to be played back and recorded.
To record on beth sides of the tape, set the tape side indicators on
both Deck 1 and Deck 2 to the forward side (D).
I
m
In order to avoid operation errors later, be sure to switch oft the
SPEED button (the "NOR" and "HI" indicator will go out) after
the tape-to-tape recording has finished.
4O
To Next Page
Loading...
Need help?
General
