Playing
back
Maintenance
English
(23)
Maintenance
Care of the parts
Thoroughly clean dust off the stylus and
record.
z
Take off the head shell with the cartridge
and clean the stylus using a soft brush. Brush
from the base to the tip.
z
Use a record cleaner to keep your records
clean.
Head shell
terminals
Wipe the head shell terminals occasionally.
Wipe the head shell terminals with a soft cloth
and fit the head shell to the tone arm.
Turn the volume down or turn the amplifier
off before fitting or removing the head shell.
Damage to your speakers can occur if the head
shell is moved while the volume is turned up.
Cleaning the dust cover
Wipe the dust cover and cabinet with a soft
cloth.
When dirt is heavy, wring a wet cloth tightly to
wipe the dirt, and then wipe it with a soft cloth.
z
Do not use solvents including benzine,
thinner, alcohol, kitchen detergent, a
chemical wiper, etc. This might cause the
exterior case to be deformed or the coating
to come off.
z
Do not wipe the dust cover while playing a
record.
This can cause static electricity. This static can
cause the tone arm to be attracted towards
the dust cover.
Moving the unit
Repackage the unit in the packaging it came
in.
If you no longer have the packaging, do the
following:
z
Take off the turntable and turntable mat and
carefully wrap them.
z
Remove the head shell and balance weight
from the tone arm and carefully wrap them.
z
Clamp the tone arm with the arm clamp and
tape it in place.
z
Carefully wrap the main unit in a blanket or
paper.
WEEE symbol
Disposal of the product outside the EU
countries
This symbol is valid within the EU
only.
Contact a local governmental office
or your dealer to confirm a right
manner of disposal.
23
SL-1200G_1210G PP北米_Black model add（GAEから再展開）_20210706-.indb 23SL-1200G_1210G PP北米_Black model add（GAEから再展開）_20210706-.indb 23 2021/07/15 9:17:362021/07/15 9:17:36
To Next Page
Loading...
Need help?
General