PL-3908
METHOD 3: AUTO BROWSE STATION
1.Turn on the radio and press the
[VF] button to switch into
frequency mode.
2.Press & hold the [VF] button
with [ ] advancing to scan
from one station to another,
staying on each station for
about 5 seconds.
3.To stop the auto browse
function, simply press the [VF]
button
Note: While operating the “Auto Browse Station” function,
you can press the [M] button anytime to store the station
into memory, and the radio will keep on auto browsing the
next available station.
METHOD 4: DIRECT KEYPAD ENTRY
To search for frequency, turn on the radio and press the
[VF] button to switch into frequency mode, press the
numeric keys [0] - [9] to enter the station frequency directly.
To search for memory, press the [VM] button to switch into
memory mode, then press the numeric keys [0] - [9] to
enter the preset memory number directly.
Notes:
1. Ignore the decimal point for FM band when inputting the
frequency numbers.
For example, FM 89.3 MHz, just enter 8 9 3.
2. If the entered frequency rate is not within the covering
area, the display would display “Err” (error) symbol.
SLEEP
Auto browse station
advancing
Frequency
changing
To Next Page
Loading...
Need help?
General
