SYSTEM SETTING
PL-39020
SETTING FM FREQUENCY RANGE: In radio off mode,
press & hold the [FM SET] button until 87.5-108MHz, 64-
108MHz, 76-108MHz, or 87-108MHz appears in the
display. Quickly keep pressing on the [FM SET] button to
select suitable frequency range for your local FM.
SETTING 12/24 CLOCK FORMAT: In radio off mode,
press & hold [12/24] button with “12H/24H " shows on
display to select your desired clock format.
SETTING MW(AM) TUNING STEP: With radio off, press &
hold [9/10kHz] button until "9kHz" or "10kHz" appear in the
display to select your desired AM tuning step
TEMPERATUE: When the AM tuning step is 10 kHz, the
temperature displays will auto switch to Fahrenheit (℉).
When the AM tuning step is 9 kHz, the temperature
displays will auto switch to Centigrade (℃).
TURN ON/OFF THE LW: With radio off, press & hold the
[MW/LW] button until “LW ON” or “LW OFF” appears in the
display to turn ON or OFF the LW respectively.
TURN ON/OFF THE CHARGING FUNCTION &
EXCHANGE THE BATTERY CONSUMPTION DISPLAY:
With radio off, press & hold the [ ] key with “ ”
& “ ” show up to activate the consumption display of
rechargeable batteries and the built-in charging system.
Press & hold the [ ] key with “ “ shows up and
“ ” disappears to activate the consumption display of
regular batteries and turn off the built-in charging function.
Note: This radio is default to use regular batteries for
power supply. In case of using rechargeable batteries, you
should switch the radio system to rechargeable batteries
mode in order to show the correct power capacity.
To Next Page
Loading...
Need help?
General
