PL-390 9
WORKING WITH STATION MEMORIES
There are total 550 preset memories within the unit. 100
preset memories for each FM, MW, and LW band, and 250
for SW.
FM ATS:
1. Fully extend the telescopic
antenna and press the [FM]
button to select FM band.
2. Press & hold the [FM] button
with “PRESET ” flashing and the
frequency start running, then
you can scan and store your
desired stations within the
present band. When the
frequency stop running, it
means the ATS operation has
been completed; then rotate
the [TUNING] knob for those
scanned and stored stations.
MW/LW ATS:
Press the [MW/LW] button to select MW/LW band, then
follow step 2 of FM ATS.
SW ATS:
Fully extend the telescopic antenna and press the SW[ ]
or [ ] button to select SW band. There are two modes for
SW ATS tuning:
Mode A: Press & hold the [ ] button to ATS the stations
within all meter bands
Mode B: Press & hold the [ ] button to ATS the stations
within present meter band only.rotate the radio for better
location (MW & LW).
flashing
Auto Tuning storage (ATS)
status
SLEEP
To Next Page
Loading...
Need help?
General
