Tektronix 2212 User Manual

CRT Readout
Top Row Readouts
Cursor Type
The Cursor Type indicates which A function has been selected.
Possible cursor types are:
AVl, AV2, AV,
AT,1/AT,
Ratio, Phase,
AVX and AVY.
The AT, 1/ AT, AVX, and associated Phase and Ratio Cursors are
displayed as vertical lines on the crt.
The AVl, AV2, AVY, AV and associated Ratio Cursors are displayed
as horizontal lines on the crt as shown in Figure 5-10.
Cursor Delta Value
The Cursor Delta Value indicates the distance between the two cur-
sors. The units in which the value is expressed, will depend upon
the cursor type.
Possible units are:
% (percent)
0
(degrees)
V (Volts)
s (seconds), Hz (Herz)
Possible prefixes are :
n (nano),
µ (micro),
m (milli),
k (kilo),
M (mega),
G (giga)
2212 User Manual
5- 63

Tektronix 2212 Specifications

General

Brand	Tektronix
Model	2212
Category	Test Equipment
Language	English