Tektronix 2212 User Manual

General Product Description
Storage and 1/0
In STORE mode, signals supplied to the vertical inputs are acquired
by the digital storage circuit and displayed on the crt screen.
You may store an acquired and displayed waveform in the reference
memory pushing the SA VE button, and recall it pressing the RE-
CALL button.
The HOLD switch is a function that stops the acquisition when
pressed.
Another standard feature of the 2212 is the Print Screen (PRNSCR).
function. This feature allows you to output waveforms and other
on-screen information to a Centronics ® compatible printer/plotter,
providing hardcopies without requiring you to put the oscilloscope
in a system controller environment. The hardcopies obtained are
based on what is displayed at the time PRNSCR is invoked.
A menu to setup the communication interface can be selected by
pressing SA VE and RECALL simultaneously. The parameters for the
menu can be selected with the TOGGLE CURSOR switch and the
cursor POSITION control.
The 2212 oscilloscope with Option 10 (GPIB) an/or Option 12 (RS-
232-C) is fully controllable and capable of sending and receiving
waveforms over the GPIB interface (IEEE 488.2 1987 standard). This
optional feature makes the 2212 ideal for making automated meas-
urements in a production or research environment that calls for
repetitive data taking
2212 User Manual
B-9
, I

Tektronix 2212 Specifications

General

Brand	Tektronix
Model	2212
Category	Test Equipment
Language	English