Tektronix 314 Manual

CH 1. Selects channel 1 vertical input for display.
Channel 1 is the triggering signal. See NOTE follow 
ing CH 2.
CH 2. Selects channel 2 vertical input for display.
Channel 2 is the triggering signal. See NOTE.
VIEWING TIME. Adjusts the viewing time from about
1 s after end of sweep to about 5 s after end of sweep.
INTEGRATE. Permits charge to build up on target
before the display is stored. For repetitive signals,
parts of which are too fast to store normally.
NOTE
When CH 1 and CH 2 buttons are pushed in to
display both channel 1 and channel 2, signal
generates an interna! composite trigger signal.
STORE. Instrument is in storage mode with button
pushed in, and in non-store mode with button out.
ENHANCE. Increases single-sweep writing speed.
AUTO ERASE. Erases stored display after each sweep
when both AUTO and NORM buttons are pushed in.
ERASE. Erases the stored display.
ENHANCE LEVEL. Adjusts the single-sweep stored
writing speed.
Fig. 7. Front panel.
6
314 Operators

Tektronix 314 Specifications

General

Brand	Tektronix
Model	314
Category	Test Equipment
Language	English