Installation Introductions
6
016-1674-50 Rackmount Kit
1. Using a #2 phillips tip screwdriver, remove the four screws (M3 8 mm)
securing the four feet to the cabinet. Lift off the four feet. See Figure 4.
1. Using a #2 phillips tip screwdriver, remove the two screws (M4 8 mm)
securing the rear cover to the instrument. See Figure 4.
2. Remove the rear cover.
3. Install the two screws removed in step 1 to its former screw holes and fix the
cabinet to the instrument.
M3X8mm
M3X8mm
M4X8mm
M3X8mm
M4X8mm
M3X8mm
Rear Cover
Screw
Screw
Screw
Screw
Screw
Screw
Foot
Foot
Foot
Foot
Figure 4: Feet and rear cover removal
Feet Removal
Rear Cover Removal
To Next Page
Loading...
Need help?
General
