Installation Introductions
016-1674-50 Rackmount Kit
7
Installing the Instrument into the Rack Adapter
The following steps describe how to attach the Rack Adapter to the instrument
in preparation for installing it into a rack.
These procedures include two installation methods.
H Attaching Bracket
H Attaching Panel
Procedure for Attaching Bracket to one Instrument
1. Set the instrument with the top down on the work surface and the front
facing you.
2. Put the bracket on the instrument and align the bracket screw holes with the
instrument screw holes. See Figure 5.
3. Attach the bracket to the instrument with four screws (M3 6 mm) using a
#2 phillips tip screwdriver.
Attaching Bracket
To Next Page
Loading...
Need help?
General
