Clear and Sanitize a Non-Functional Instrument
Clear and Sani
tize a Non-Functional Instrument
If your instr
ument is not f unctioning and you need to clear or sanitize it, proceed
as follows:
Acquisition board
Only qualified personnel should perform service procedures. Read the Servic e
Safety Sum
mary and the General Safety Summary in the DPO2000 and MSO2000
Series Digital Phosphor and Mixed Signal O scilloscopes Service Manual before
performing any service procedures.
Remove the Acquisition board and return the product to Tektronix. A n ew
Acquisition board will be installed, and the instrument will be repaired and
adjusted as necessary.
For removal instructions, refe r to the service manual, part number 071-2331-XX,
available on the Tektronix Web site at www.tektronix.com/manuals.
After removal of the Acquisition board, refer to your company's internal policies
regarding handling or disposal of the board.
USB Flash Drive
Remove the USB flash drive and return the instrument to Tektronix for repair.
Afte
rremovaloftheUSBflash drive, refer to your company's internal policies
regarding handling or disposal of the flash drive.
Charges
Replacement of any missing hardware will be charged according to the rate at
the
time of replacement.
DPO2000/B and MSO2000/B Series Declassification a nd Security Instructions 7
To Previous Page
Loading...
Need help?
General
