Tektronix DPO2012 Programmer's Manual

Commands Listed in Alphabetical Order
TRIGger:A:BU
S:B<x>:CAN:DATa:DIRection
Sets or returns the CAN trigger data direction to be valid on a Read, Write,
or Either condition for bus <x>, where x is the bus number. This applies only,
if the trigge
r condition is ID.
Conditions
Requires a DPO2AUTO application module.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:CAN:DAT a:DIRection {READ|WRITE|NOCA RE}
TRIGger:A:BUS:B<x>:CAN:DAT a:DIRection?
Arguments
READ sets the CAN data direction to READ.
WRITE sets the CAN data direction to WRITE.
NOCARE sets the CAN d ata direction to e ither.
Examples
TRIGGER:A:BUS:B1:CAN:DATA: DIRECTION WRITE sets the CAN data
direction to Write.
TRIGger:A:BUS:B<x>:CAN:DATa:QUALifier
Sets or returns the CAN data qualifier for bus <x>, where x is the bus number.
This applies only, if the trigger condition is IDANDDATA or DATA.
Conditions
Requires a DPO2AUTO application module.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:CAN:DAT a:QUALifier
{LESSThan|MOREThan|EQUal|U NEQual|LESSEQual|MOREEQual}
TRIGger:A:BUS:B<x>:CAN:DAT a:QUALifier?
Arguments
LESSThan sets the oscilloscope to trigger when the data is less than the qualifier
value.
MOREThan sets the oscilloscope to trigger when the data is more than the qualifier
value.
EQUal sets the oscilloscope to trigger when the data is equal to the qualifier value.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-297

Tektronix DPO2012 Specifications

General

Brand	Tektronix
Model	DPO2012
Category	Test Equipment
Language	English