Tektronix DPO2012 Programmer's Manual

Commands Listed in Alphabetical Order
Examples
TRIGGER:A:BUS
:B1:LIN:CONDITION ERROR
sets the LIN trigger condition
to error.
TRIGGER:A:BUS:B1:LIN:CONDI TION? might return
TRIGGER:A:BUS:B1:LIN:CONDI TION SYNCFIELD indicating that the LIN
trigger condition is sync field.
TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue
Sets or returns the binary data string to be used for LIN trigger if trigger condition
is ID or IDANDDATA.
Conditions
This command requires a DPO2AUTO applic ation module.
Group
Bus
Syntax
TRIGger:A:BUS:B<x>:LIN:DAT a:HIVALue <QString>
TRIGger:A:BUS:B<x>:LIN:DAT a:HIVALue?
Arguments
<QString> is a quoted string that is the binary data string used for LIN trigger if
the trigger condition is ID or IDANDDATA.
Examples
TRIGGER:A:BUS:B1:LIN:DATA: HIVALUE "11001010" sets the high v alue
to
11001010.
TRIGGER:A:BUS:B1:LIN:DATA: HIVALUE? might return
TRIGGER:A:BUS:B1:LIN:DATA: HIVALUE "XXXXXXXX" indicating
that the high value is don't care.
TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier
Sets or returns the LIN data qualifier. This only applies if the trigger condition is
IDANDDATA or DATA.
Conditions
This command requires a DPO2AUTO applic ation module.
Group
Bus
Syntax
TRIGger:A:BUS:B<x>:LIN:DAT a:QUALifier
{LESSThan|MOREThan|EQUal|U NEQual|LESSEQual|MOREEQual|INrange|OUTrang
e
TRIGger:A:BUS:B<x>:LIN:DAT a:QUALifier?
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-305

Tektronix DPO2012 Specifications

General

Brand	Tektronix
Model	DPO2012
Category	Test Equipment
Language	English