Tektronix DPO2012B Programmer's Manual

Appendix B: Waveform Data in MSO/DPO2000B and MSO/DPO2000 Series Instruments
turned on. Use t
he WFMOutpre:RECOrdlength? query to determine the a ctual
record length for digital waveforms.
Extensions to the DATA
Commands
Like the MSO/DPO4000/B series, the MSO/DPO2000/B series provides the
DATa:WIDth c
ommand that allows you to specify the data word width (in
bytes) used when querying data from the instrument or when sending data to
the instrument with the CURVe command. The following are the extensions to
data commands:
DATa:RESOlution
DATa:COMPosition:AVAILable?
DATa:COM
Position
WFMOutpre Parameters
The WFMOutpre? parameters correspond to the source waveform specified by
the DATa:SOUrce command. The following are the extensions to Waveform
Outpre
commands:
WFMOutpre:COMPosition
WFMOutpre:FILTERFreq?
WFMOutpre:RECOrdlength?
WFMInpre Parameters
The WFMInpre? parameters correspond to the destination reference waveform
specified by the DATa:DESTination command. The following are the extensions
to Waveform Inpre commands:
WFMInpre:FILTERFreq
WFMInpre:COMPosition
FilterVu Frequency Control
C
ommands
The following are the FilterVu commands:
FILTERVu:FREQuency
FILTERVu:FREQuency:AVAILable?
DISplay:GLITch
DISplay:INTENSITy:GLITch
B-6 MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2012B Specifications

General

Brand	Tektronix
Model	DPO2012B
Category	Test Equipment
Language	English