Getting Acquainted with the Oscilloscope
11. Measurement readouts show the selected
measurements. You can select up to four
measurements to display at one time.
A
symbol appears instead of th e
expected numerical measurement if a
vertical clipping condition exists. Part of the
waveform is above or below the display. To
obtain a proper numerical measurement,
turn the vertical scale and position knobs
to make all of the wa veform appear in the
display.
12. T he auxiliary waveform readouts show the
vertical and horizontal scale factors of the
math and reference waveforms.
13. T he channel readout shows the channel
scale factor (per division), coupling, invert,
and bandwidth status. Adjust with the
Vertical Scale knob and the channel 1, 2,
3,or4 menus.
68 DPO2000 and MSO2000 Series Oscilloscopes User Manual
To Next Page
Loading...
Need help?
General
