Operating Requirements
Environmental Ratings
Table 3: Environmental specifications
Characteristic Description
Operating 0 °C to + 50 °C
Temperature
Nonoperating
-20°Cto+60°C
Operating High: 40 °C to 50 °C, 10% to 60% RH
Low: 0 °C to
40 °C, 10% to 90% RH
Humidity
Nonoperating
High: 40 °C
to 60 °C, 5% to 60% RH
Low: 0 °C to 40 °C, 5% to 90% RH
Operating 3,000 m (9,842 ft)
Altitude
Nonopera
ting
12,000 m (39,370 ft)
Cooling 50 mm (2 inch)
CAUTION. To ensure proper cooling, keep the sides and rear of the oscilloscope clear of obstructions.
Physical Specifications
Table 4: Physical specifications
Characteristic Description
Height
175 mm (6.885 inches), including the feet but not the handle
Width
377 mm (14.85 inch)
Dimensions
Depth
134 mm (5.3 inch), from the feet to the front of the knobs
139 mm (5.47 inch), from the feet to the front of the front cover
Net
3.6 kg (7 lbs 14 oz), stand-alone oscilloscope
Weight
Shipping
Cleaning
Inspect the oscilloscope and probes as often as operating conditions require. To
clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the oscilloscope and probes with a
lint-free cloth. Use care to avoid scratching the clear glass display filter.
2. Use a soft cloth dampened with water to clean the oscilloscope. Use an
aqueous solution of 75% isopropyl alcohol for more efficient cleaning.
CAUTION. To avoid damage to the surface of the oscilloscope or probes, do not
use any abrasive or chemical cleaning agents.
MSO2000B and DPO2000B Installation and Safety Instructions 15
To Next Page
Loading...
Need help?
General
