Tektronix DPO2024B Installation And Safety Instructions

Getting Acquainted with the Oscilloscope
1. TekVPI externa
l power supply connector. Use the connector for the TekVPI
external power supply (Tektronix part number 119‑7465‑XX) when additional
power is needed for TekVPI probes.
Rear-Panel Connectors
1. LAN. Use the LAN (Ethernet) port (RJ-45 connector) to connect the
oscilloscope to a 10/100 Base-T local area network. The port is available on
the opti
onal connectivity module (DPO2CONN).
2. Lock. Use to secure the oscilloscope and optional connectivitiy module.
3. Video Out. Use the Video Out port (DB-15 female connector) to show the
oscilloscope display on an external m onitor or projector. The port is available
on the
optional c onnectivity module (DPO2CONN).
4. USB 2.0 Device port. Use the USB 2.0 Full Speed Device port to connect
aPict
Bridge compatible printer, or for direct PC control of the oscilloscope
using USBTMC protocol.
NOTE. The cable connected from the USB 2.0 Device port to the host computer
must meet the USB2.0 specification for high speed operation whe n connect ed to
a high speed host controller.
5. Power input. Attach to an AC power line with integral safety ground.
32 MSO2000B and DPO2000B Installation and Safety Instructions

Tektronix DPO2024B Specifications

General

Brand	Tektronix
Model	DPO2024B
Category	Test Equipment
Language	English