Tektronix KEITHLEY 2200 Series User Manual

Commands Listed in Alphabetical Order
Related Commands
INSTrument:CO
Mbine:OFF, INSTrument:COMbine:PARAllel,
INSTrument:COMbine:TRACk
Examples
INSTRUMENT:COMBINE:SERIES
INSTrument:COMbine:TRACk (No Query Form)
This command sets CH1 and CH2 in track mode. In this m ode, the ratio of CH1
to CH2 voltage that is set before sending the command will be maintained for
subsequent voltage settings.
Group
Channel
Syntax
INSTrument:COMbine:TRACk
Related Commands
INSTrument:COMbine:OFF, INSTrument:COMbine:PARAllel,
INSTrument:COMbine:SERies
Examples
INSTRUMENT:COMBINE:TRACK
INSTrument:COUPle[:TRIGger]
This command is used to determine which channels will respond to the trigger
command.
Group
Channe
l
Syntax
INSTrument:COUPle[:TRIGger] {CH1|CH2|CH3}
INSTrument:COUPle[:TRIGger]?
Related Commands
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude][SOURce:]VOLTage[:
LEVel]:TRIGgered[:IMMediate][:INCRement]*TRGTRIGger[:IMMediate]
Arguments
CH1, CH 2, and CH3 are the channel numbers (only CH1 or CH2 are available
for the two channel instruments).
NOTE. CH3 is not a valid channel on dual output models.
Series 2200 Programmable Multichannel DC Power Supplies Programmer Manual 2-19

Tektronix KEITHLEY 2200 Series Specifications

General

Brand	Tektronix
Model	KEITHLEY 2200 Series
Category	Power Supply
Language	English