Tektronix MDO3000 Series User Manual

To clear Not applicable, no user data
Process to sanitize Not applicable, no user data
EEPROM
Type and size EEPROM 1 Kbit
Function Application module firmware
Type of user information
stored
None
Method of modification Not applicable
Data input method Not applicable
Location MDO3000 application modules
User accessible Not applicable
To clear Not applicable, no user data
Process to sanitize Not applicable, no user data
Media and data export devices
Two USB host ports Supports removable USB flash drive
Function User storage of reference waveforms, screen images, and instrument setups
Method of modification Directly
Data input method User writeable
Location One USB host port on the front of the instrument
On USB host port on the rear of the instrument
Files can be deleted or over-written on the oscilloscope or on a PC. USB flash drive can be
removed or destroyed.
User accessible Yes
Process to disable The USB host port cannot be disabled with MDO3000 Series instruments without the MDO3SEC
option.
If your instrument has the MDO3SEC option, perform the procedure Use the MDO3SEC option to
disable all IO ports to disable the two USB host ports.
USB device port
Function Supports remote control and data transfer to a PC.
Method of modification Directly
Data input method Remote control via USBTMC
Location USB device port on rear of the instrument
User accessible Yes
Memory devices Nonvolatile memory devices (cont.)
4 MDO3000 Series Declassification and Security Instructions

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English