Tektronix MSO5104B User Manual

Acquisition
Changing the acquisition mode
Use this procedure to c hange the acquisition mode.
1. Select Ho riz/Acq > Acquisition Mode.
2. To select an acquisition mode, do one
of the following:
Select an acquisition mode directly
from the menu.
Click Mode..., and then select an
acquisition mode.
3. For Ave
rage or Envelope acquisition
modes, click the #ofWfmscontrol, and
then set the number of waveforms with
the mul
tipurpose knob. For W fmDB
mode, click the Samples control, and
then set the number of samples with the
multi
purpose knob.
Quick tip
Click the keypad icon to set the number of waveforms or samples.
42 MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO 5000B Series U ser M anual

Tektronix MSO5104B Specifications

General

Brand	Tektronix
Model	MSO5104B
Category	Test Equipment
Language	English