Tektronix TBS1000 Series User Manual

Maintenance
Figure 6-3: Main board with the Display Adapter (refer to: Service Manual 077-0772-00)
Installation.
1. Install the switch keypad mat in the front case if it was removed.
2. Place the internal assembly in the front case.
3. Install the five screws to attach the internal assembly to the front case.
4. Ass
emble the oscilloscope by performing the installation procedure in reverse
order f or each module that was removed.
6–14 TBS1000 Series Oscilloscope Service Manual

Tektronix TBS1000 Series Specifications

General

Brand	Tektronix
Model	TBS1000 Series
Category	Test Equipment
Language	English