e*Scope
TDS3000B Serie s User Manual
3-89
Accessing e*Scope
After your instrument is set up with the correct ethernet setti ngs, you
are ready to access that instrument over the internet. To access the
oscilloscope e*Scope server, do the following steps:
1. On a PC or work station, open your preferred browser program.
2. In the Location or Address field (where you normally enter a
URL), type in the IP address of the TDS3000B instrument to
which you want to connec t. For example, 188.121.212.107. Do
not prec ede the IP addre ss with any characters. Then press the
Return ke y.
3. The browser program loa ds the instrument’s e*Scope home page ,
which is an im age of the screen c ontents when your browser
accessed the instrument. The e*Scope home page will look
something like the following image:
To Next Page
Loading...
Need help?
General
