OS Version '2' (2)
About to set upgrade OS mode
Wait until the command finishes
File transfer OK
File transfer OK
Wait for upgrade checking
Upgrade verified
Done!
Unlocking FTP buffer
Do you want to erase upgrade file from memory?(Yes/No)? n
If the upgrade is unnecessary, this will be the output:
DUT atm1/0 monitor+upgrade-fw start
Locking FTP buffer
Upgrade file len 17168512 bytes
Upgrade file version 1.0.0.0 0.0.0.0
Upgrade file checksum verification ok
UBoot Version '1' (2)
OS Version '1' (2)
About to set upgrade OS mode
Wait until the command finishes
Upgrade version matches installed version!
Unlocking FTP buffer
Do you want to erase upgrade file from memory?(Yes/No)? n
If the upgrade is in progress using the provided access for the port being updated, the connection will be interrupted.
Once the upgrade is complete, communication will be restored, and the process-related log can be retrieved:
DUT atm1/0 monitor+upgrade-fw show-log
----- UPGRADE FW LOG BUFFER START (302) -----
Locking FTP buffer
Upgrade file len 17168512 bytes
Upgrade file version 1.0.0.0 0.0.0.0
Upgrade file checksum verification ok
UBoot Version '1' (2)
OS Version '1' (2)
About to set upgrade OS mode
Wait until the command finishes
Upgrade version matches installed version!
Unlocking FTP buffer
----- UPGRADE FW LOG BUFFER END -----
When the upgrade file is no longer needed, it can be released:
DUT atm1/0 monitor+upgrade-fw release-mem
File erased!
DUT atm1/0 monitor+upgrade-fw release-mem
No file to be erased
3.6.7 Connecting for configuration
The Teldat M2 router family offers a convenient RJ45 female connector called AUX. on its front panel, allowing ac-
cess to the device's local console.
3 Components and Power Supply Teldat
20 Teldat M2/M2L
To Next Page
Loading...
Need help?
General
