Name: Tenda AC18
Brand: Tenda
Rating: 5 (1 reviews)

To Next Page

To Previous Page

- 26 -

---End

Verification

Verify that the WiFi network is inaccessible during 23:00 to 07:00 every day while accessible

during the rest of the time.

Note

To enable the WiFi function during the downtime, press the WiFi On/Off button on the back panel of the

router. This button is the preferred means to control the function. Alternatively, you can enable the WiFi

function by disabling the WiFi function schedule on the WiFi Schedule page.

3.3.3 Wireless Repeating

The wireless repeating function enables a wireless router or an AP to function as a wireless

repeater to extend wireless network coverage. At least two wireless routers are required for

implementing this function. You can use this router to extend wireless network coverage in

WISP or Client+AP mode.

Note

If wireless repeating is enabled, the Sleeping mode, IPTV function, guest network, WPS function, Tenda

App function, and WiFi function schedule become unavailable. For details, refer to the message on the

router web UI.

Application Scenario

User A subscribes to an 8 Mbps broadband service and purchases a wireless router for setting

up an LAN with internet connectivity in his 100 square meters apartment, which has three

bedrooms, one dining room, one living room, two restrooms, and one kitchen. The router is

placed in the living room. The WiFi signals are strong in the living room and master bedroom,

but too poor in the other bedrooms and the restrooms to access the internet.

Questions and Answers:

Need help?

Do you have a question about the Tenda AC18 and is the answer not in the manual?

Tenda AC18 Specifications

General