Tenda AC18 User Manual

- 3 -
LED Indicator
Name
LED Indicator
Description
State
State Description
Off
The 5 GHz WiFi function is disabled.
USB3.0
USB port indicator
Solid on
The port has been connected to a USB device.
Blinking
The port is transmitting of receiving data.
Off
The port is not connected to a USB device or a USB
device has been ejected.
SYS
System indicator
Blinking
The system is working properly.
1.4.2 Button& Ports
Description of buttons and ports
Button/Port
Description
DC-IN
It is the power port to be connected to the power adapter included
in the package.
Power
It is the button used to power on/off the router after the router is
connected to a power supply using the power adapter.
WiFi On/Off
It is the button used to enable or disable the WiFi function.
WPS
It is the button used to perform WPS pairing between the router
and another device.
Reset
It is the button used to restore the factory settings of the router.
Internet
It is used to connect to an Ethernet cable with Internet
connectivity.
1, 2, and 3
They are LAN ports that can be connected to devices using Ethernet
cables, such as computers, laptops, and switches.
4/IPTV
It is a LAN port by default. After the IPTV function of the router is

Tenda AC18 Specifications

General

Color	black
Wi-Fi Speed	1900 megabits per second
Wi-Fi Mesh System	no
Frequency Band	2.4 ghz, 5.0 ghz
Beamforming	yes
Ethernet Standard	10/100/1000
Ethernet Switch	yes
Wireless Standard	ac, n
Gigabit Ethernet Speed	yes
Antennas	3
Parental Control	yes
Firewall	none
Data Encryption	yes
Encryption Type	wpa, wpa2, wpa-psk, wpa2-psk
Ports	rj-45, usb
LAN Ports	4
WAN Ports	1