Tenda UH150 User Manual

Tenda Wireless Network Adapter User Guide
-46-
When it is switched to AP mode, the wireless adapter will
automatically set its IP address as 192.168.123.1, and other clients
that connected to this AP will automatically obtain the IP addresses of:
192.168.123.X(X is any integer from 2 to 254).The function buttons on
the top (From L to R )are respectively Config AP, Advanced, Access
Control List, Associate List, About, Help, and MiniSize, while the left
column displays Turn On/Off RF, Security /No security, and AP mode
icon.
4.2.1 Config AP
This screen is used to set the AP’s general parameters including
SSID, wireless mode, channel, authentication type and encryption
type, as shown in the picture below.

Tenda UH150 Specifications

General

Brand	Tenda
Model	UH150
Category	Adapter
Language	English