Tenda UH150 User Manual

Tenda Wireless Network Adapter User Guide
-57-
Appendix 2 How to Set WPS
WPS setting supports two modes :PBC and PIN. The detailed setting
steps are as follows:
1.Wireless Connection in PBC Mode
1.1 Enable the router’s WPS-PBC feature.
If your router provides WPS button, just press and hold it for about 1
second, then the WPS LED will be flashing for about 2 minutes, which
indicates the router’s WPS feature has been enabled. Otherwise, you
can also log on to the router’s web-based utility to enable the PBC
mode in WPS settings screen(For detailed settings,please refer to
your router’s user guide).
1.2 Perform PBC connection on the UI of the wireless adapter
1) On the main interface of Tenda’s UI, click “Profile Settings”—“Add
WPS Profile”.

Tenda UH150 Specifications

General

Brand	Tenda
Model	UH150
Category	Adapter
Language	English