www.ti.com
Connectors
9
SLUUC57A–October 2019–Revised June 2020
Submit Documentation Feedback
Copyright © 2019–2020, Texas Instruments Incorporated
BQ79600-Q1 Evaluation Module
Table 9. Pin Description - J9 (continued)
Pin Name
19 nFAULT signal from BQ79600-Q1
20 NC
3.1.4 High-Side and Low-Side Communications
There are two sets of 4-position molex connectors available on each board. These provide high-side (J15)
and low-side (J14) communications between stacked EVM devices.
Table 10. Connector Information
Designator Manufacturer Part Number Mating Connector
J14/J15 Molex Manufacturer:
0705510038
Digi-Key: WM14059-ND
Manufacturer:
0050579404
Digi-Key: WM2902-ND
Table 11. Pin Description - J14
Pin Name Comments
1 COML_N COM lowside negative
2 COML_P COM lowside positive
3 N/A Unused
4 N/A Unused
Table 12. Pin Description - J15
Pin Name Comments
1 N/A Unused
2 N/A Unused
3 COMH_P COM highside positive
4 COMH_N COM highside negative
To Next Page
Loading...
Need help?
General
