Hardware
www.ti.com
18
SLAU597E–March 2015–Revised January 2018
Submit Documentation Feedback
Copyright © 2015–2018, Texas Instruments Incorporated
MSP432P401R SimpleLink™ Microcontroller LaunchPad™ Development Kit
(MSP
‑
EXP432P401R)
2.9.2.1 MSP-EXP432P401R Updates
From the perspective of the board, all of the changes are aesthetic or make the kit easier to use (see
Figure 12). For example, moving the user buttons to the side of the board makes them easier to reach
when you have a BoosterPack plug-in module connected to the top of the LaunchPad development kit.
The button placement has changed, but the physical button connections are the same. The most
significant change is the addition of an extra 10-pin ARM JTAG connector. This connector lets you use the
LaunchPad development kit as a stand-alone XDS110 debug probe.
Figure 12. Differences Between Rev 1.0 (Black) and Rev 2.0 (Red)