Texas Instruments MSP432P401R User Manual

www.ti.com Software Examples
21
SLAU597E–March 2015–Revised January 2018
Submit Documentation Feedback
Copyright © 2015–2018, Texas Instruments Incorporated
MSP432P401R SimpleLink™ Microcontroller LaunchPad™ Development Kit
(MSP ‑ EXP432P401R)
3.1.1 Operation
Upon powering up the out-of-box demo, the RGB LED2 blinks red at 1 Hz. Switch S1 can be tapped
repeatedly at a constant rate to set the blink frequency of LED2. Switch S2 cycles LED2 through four
different color settings: Red, Green, Blue, and random RGB color. Each color setting retains its own blink
frequency.
A PC GUI accompanies the out-of-box demo to allow user to set the color and blink rate of the RGB LED.
Connect the LaunchPad development kit to a computer using the included USB cable. The out-of-box GUI
can be opened from within CCS using the TI Resource Explorer: Software > SimpleLink MSP432 SDK >
Development Tools > MSP-EXP432P401R > Demos > outOfBox_msp432p401r, and launch the Out of
Box Experience GUI.
Figure 14. Out-of-Box GUI Running Locally
The GUI can also run directly from the TI Cloud Tools (see Section 4.1.2).

Texas Instruments MSP432P401R Specifications

General

Brand	Texas Instruments
Model	MSP432P401R
Category	Microcontrollers
Language	English