ThyssenKrupp Flow2 User Manual

Controls
Flow2 stairlift
14
Descent system for emergencies:
With the main switch you can also let the stairlift descend in the unlikely
even that a malfunction occurs and the stairlift stops halfway along the rail.
Pull out the main switch on the rear
of the motor cover as far as possible
to activate the descent system. Keep
the main switch in this position until
the stairlift has arrived at the desired
location. If you release the main switch,
the stairlift will stop.
As a safety precaution, the emergency
descent system will not work after the
stairlift has stopped for a short time at a
charging contact.
Fig. 2/6: Making the lift descend in an
emergency
Fig. 2/6: Making the lift descend in an
emergency
WARNING
The descent system is not intended for everyday use.
WARNING
The descent system is not intended for everyday use.

ThyssenKrupp Flow2 Specifications

General

Brand	ThyssenKrupp
Model	Flow2
Category	Stairlifts
Language	English