Flow2 stairlift
25
3. Recognizing and resolving signals
When you move the joystick in the call and park box or the control unit, the
lamp on these controls, in combination with an audio signal from the stairlift,
indicate the status of the stairlift. The following table gives an overview of
the possible signals.
3.1 Signals during normal operation of the stairlift
Signal on control Meaning
Constant green lamp. The joystick has been operated and the stairlift
is moving or will move.
Constant green lamp
+ audio signal from
motor.
After the stairlift has been operated, the stairlift
is operated again with a different control. The
stairlift will start moving within 10 seconds.
3.2 Signals on the motor cover
Signal on the motor Meaning
Constant blue lamp. The stairlift is on. The stairlift can be switched
off with the main switch.
No lamp. The stairlift is off and will not work. The stairlift
can be switched on with the main switch.
To Next Page
Loading...
Need help?
General
