ENGINE OPERATION56
7
ENOM00068-A
ENOW00051-0
During shallow water operation, be careful
not to place your hand between the swivel
bracket and the clamp bracket. Be sure to
tilt the outboard motor down slowly.
ENOW00053-0
While in shallow water drive position, do not
operate the outboard motor in Reverse.
Operate the outboard motor at slow speed
and keep the cooling water intake sub-
merged.
ENOW00054-0
Do not overtilt outboard motor when driving
shallow water, or air may be sucked through
water inlet, potentially leading to engine
overheating.
1. Water inlet
ENOM00069-A
Power Trim & Tilt type
1. Operate the Power Trim & Tilt switch
and tilt the outboard motor up into
desired shallow water running posi-
tion.
9. Shallow water operation
WARNING
CAUTION
CAUTION
To Next Page
Loading...
Need help?
General
