INSPECTION AND MAINTENANCE 85
10
ENOM00107-A
ENOW00935-0
Striking the sea bottom or an underwater
object may severely damage the outboard
motor.
Follow the procedure below and consult
a dealer as soon as possible.
1. Stop the engine immediately.
2. Check the control system, gear case,
boat transom etc.
3. Return to the nearest harbor slowly
and carefully.
4. Consult a dealer check the outboard
motor before operation again.
ENOM00121-0
When operating the outboard motors in
reverse at more than the lowest speed,
be sure that all engines are running.
If any engine has stopped, be sure to tilt
the outboard motor up and keep its pro-
peller out of the water.
Otherwise, water could enter the engine
and cause damage to it.
7. Striking underwater object
CAUTION
8. Operation with multiple
outboard motors
ENOF01145-0
To Next Page
Loading...
Need help?
General
