TOHATSU MFS 25d User Manual

INSPECTION AND MAINTENANCE 73
10
ENOM01106-1
It is important to inspect and maintain your outboard motor regularly. Make sure to per-
form each service at interval specified in the chart below. Maintenance intervals are
determined by the number of hours outboard motor has been used or number of
months, whichever comes first.
2. Periodic Inspection
Description
Inspection intervals
Inspection procedure Remarks
First 20
hours or 1
month
Every 50
hours or 3
months
Every 100
hours or 6
months
Every 200
hours or 1
year
Every 400
hours or 2
year
Fuel System
Fuel filter
z/{
Check and clean / Replace if
necessary.
Fuel filter (Vapor
separator)
{
Check and clean / Replace if
necessary.
High pressure
fuel hose
z/{z/{
Check / Replace if necessary.
Fuel tank
z/{z/{
Check and clean.
Fuel tank cap
z/{z/{
Check/Replace if necessary.
Fuel pump
{
Check/Replace if necessary.
Fuel pressure
{
Check
Hose
z/{z/{
Check/Replace if necessary.
Ignition
System
Spark plug
z
Check and clean.
Gap 0.8-0.9 mm
(0.031-0.035 in)
Spark plug cap/
High tension cord
{{
Check/Replace if necessary.
Starting
System
Starter rope
z/{z/{
Wear check/ Replace if
necessary.
Starter motor
{
Check (pinion)
Battery/Cable
connection
{{
Battery fluid level Check and
Terminal loose.
Engine
Engine oil
z
Replace
z
Replace
Replace
Approx 1500 mL
(1.6/1.3 US/Imp.
qt.)
Oil filter replace
1700 mL (1.8/1.5
US/Imp. qt.)
Oil filter (4 stroke)
{
Replace
{
Replace
Replace
Valve clearance
{
Check and adjust.
Timing belt
{
Check/Replace if necessary.
Compression
pressure
{
Check
Thermostat
{
Check / Replace if necessary.
*"z" This procedure can be performed by end user.
*"
{" This procedure shall be carried out by the dealer.

TOHATSU MFS 25d Specifications

General

Brand	TOHATSU
Model	MFS 25d
Category	Outboard Motor
Language	English