TOPP C25 User Manual

16
EN
C25
Tab 1 shows the technical data that makes up actuator C25.
SUPPLY VOLTAGE
ABSORBED CURRENT
ABSORBED POWER UNDER LOAD
MAXIMUM APPLICABLE THRUST LOAD
MAXIMUM APPLICABLE TRACTIVE LOAD
IDLE TRANSLATION SPEED
DURATION OF MAXIMUM IDLE STROKE
(1)
SELECTABLE AT LIMIT SWITCH
PROTECTION AGAINST ELECTRIC SHOCK
(2)
TYPE OF SERVICE S2
PROTECTION GRADE FOR ELECTRIC APPLIANCES
OPERATING TEMPERATURE
LIMIT SWITCH SELECTED AT
ADJUSTMENT OF THE WINDOW FRAME CONNECTION
WINDOW MINIMUM HEIGHT (H)
PARALLEL CONNECTION OF MORE ACTUATORS
ON THE SAME WINDOW
ACTUATOR WEIGHT INCLUDING BRACKETS
PARALLEL CONNECTION OF MORE ACTUATORS
ON DIFFERENT WINDOWS
GROSS WEIGHT
(3)
Electronics with acoustic alarm to signal an incorrect assembling to the user
230V ~ 50Hz
0,23 A
45 W
200 N
200 N
200mm / 380mm
37 mm/s
11 s
Class II
4 minutes
IP 30
-5°C ÷ +50°C
250 mm
500 mm
Top hung
Bottom hung
Top hung window from 0 ÷ 30 mm
Bottom hung window from 0 ÷ 20 mm
200 mm
380 mm
350 mm
1000 mm
No
Yes
(See wiring diagram)
1,1 Kg
1,5 Kg
C25 230V
MODEL
Fig.2a and Fig.2b show the names of the main parts that make up the actuator.
3.2
NAME OF COMPONENTS AND DIMENSIONS
3.3
TECHNICAL DATA
(1)
Tollerance on the precision of the output limit switch intervention: ± 10 mm.
(2)
Limited service duration according to EN 60034.
(3)
The “buzzer” device activates automatically and emits a continuos “beep” until the actuators stays
powered. For further details on the functioning see par. 5.6.
INSTALLATION AND USE INSTRUCTIONS
Tab.
1

TOPP C25 Specifications

General

Brand	TOPP
Model	C25
Category	Controller
Language	English